Reliable parents and children Essay Example

Reliable parents and children Paper A dedicated practitioner that offers a reliable service to its users is of utmost importance. Reliability ensures the provider is there at all times expected. If a child and parent expects to see the provider at drop off and pick up times it is essential the provider is there. Children and parents would not have the confidence in the setting if the practitioner were regularly late.  While working with children days can be quite varied for example a field trip may be planned or a concert. Parents may drop in unexpectedly which means the practitioner must be adaptable. Commitment to the setting is a must if a child is to feel secure. The adult/child bond cannot be built if there is a high staff turnover. This would create an unsettling environment for children and parents. A successful practitioner will have personal qualities such as patience, good listening skills, understanding, a caring nature and must be fun. These qualities will ensure children feel valued and included. He/she must enjoy the work that they are doing. Children will want to spend time in the company of a practitioner with these qualities. It is also very important the practitioner feels comfortable whilst acting silly. Children revel in adults crawling around making animal noises or dressing up, being able to play with a child on their own level creates strong bonds between adult and child. It helps make the establishment an exciting stimulating place to be. We will write a custom essay sample on Reliable parents and children specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Reliable parents and children specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Reliable parents and children specifically for you FOR ONLY $16.38 $13.9/page Hire Writer The practitioner should provide routines and consistent rules that children can understand and follow. It is important a childcare practitioner can be consistent. A daily routine ensures the child knows where and what they should be doing at present and what will be happening next, helping them feel secure. When dealing with behaviour you must be consistent a child would feel they were treat unfairly if one day they were allowed to jump off the slide and then the following day they reprimanded for the same thing. Also it is important to be consistent with the rules for every child regardless of race, religion or gender. To summarise I believe the three most important qualities an early years practitioner should have are:  Organised An organised establishment is a safe establishment. Without good organisation the provision could prove dangerous to its users. For example not enough staff working one day to care for children. Play equipment not maintained could be fatal to a small child.  Reliable parents and children depend on this person and need to know he/she will be there providing the service expected.  Job satisfaction if the practitioner is unhappy in their work it will reflect badly on the service they provide. Children would pick up on the carers negative feelings and the practitioner would be unable to create a happy secure setting. A person who enjoys their work will communicate better with parents and children on all levels and build more positive relationships. I believe childcare establishments are improving dramatically. In recent years the ownership of providing learning and not just childcare has taken place. Many more staff are trained and I believe funding should be available for all early years staff to gain formal qualifications. Early years staff would then be in a position to offer parents informative advice and help answer the many questions asked by parents.

Voting Rights Act of 1965

Voting Rights Act of 1965 The Voting Rights Act of 1965 is a key component of the civil rights movement that seeks to enforce the Constitutions guarantee of every Americans right to vote under the 15th Amendment. The Voting Rights Act was designed to end discrimination against black Americans, particularly those in the South after the Civil War. Text of the Voting Rights Act An important provision of the Voting Rights Act reads: No voting qualification or prerequisite to voting, or standard, practice, or procedure shall be imposed or applied by any State or political subdivision to deny or abridge the right of any citizen of the United States to vote on account of race or color. The provision reflected the 15th Amendment of the Constitution, which reads: The right of U.S. citizens to vote shall not be denied or abridged by the United States or by any State on account of race, color, or previous condition of servitude. History of the Voting Rights Act President Lyndon B. Johnson signed the Voting Rights Act into law on August 6, 1965. The law made it illegal for Congress and state governments to pass voting laws based on race and has been described as the most effective civil rights law ever enacted. Among other provisions, the act prohibited discrimination through the use of poll taxes and the application of literacy tests to determine whether voters could take part in elections. It is widely regarded as enabling the enfranchisement of millions of minority voters and diversifying the electorate and legislative bodies at all levels of American government, according to The Leadership Conference, which advocates for civil rights. Legal Battles The U.S. Supreme Court has issued several major rulings on the Voting Rights Act. The first was in 1966. The court initially upheld the constitutionality of the law. Congress had found that case-by-case litigation was inadequate to combat wide-spread and persistent discrimination in voting, because of the inordinate amount of time and energy required to overcome the obstructionist tactics invariably encountered in these lawsuits. After enduring nearly a century of systematic resistance to the Fifteenth Amendment, Congress might well decide to shift the advantage of time and inertia from the perpetrators of the evil to its victims. In 2013, the U.S. Supreme Court threw out a provision of the Voting Rights Act that required nine states to get federal approval from the Department of Justice or a federal court in Washington, D.C., before making any changes to their election laws. That preclearance provision was originally set to expire in 1970 but was extended numerous times by Congress. The decision was 5-4. Voting to invalidate that provision in the act were Chief Justice John G. Roberts Jr. and Justices Antonin Scalia, Anthony M. Kennedy, Clarence Thomas and Samuel A. Alito Jr. Voting in favor of keeping the law intact were Justice Ruth Bader Ginsburg, Stephen G. Breyer, Sonia Sotomayor and Elena Kagan. Roberts, writing for the majority, said that portion of the Voting Rights Act of 1965 was outdated and that the conditions that originally justified these measures no longer characterizes voting in the covered jurisdictions. Our country has changed. While any racial discrimination in voting is too much, Congress must ensure that the legislation it passes to remedy that problem speaks to current conditions. In the 2013 decision, Roberts cited data that showed turnout among black voters had grown to exceed that of white voters in most of the states originally covered by the Voting Rights Act. His comments suggest that discrimination against blacks had diminished greatly since the 1950s and 1960s. States Impacted The provision struck down by the 2013 ruling covered nine states, most of them in the South. Those states are: AlabamaAlaskaArizonaGeorgiaLouisianaMississippiSouth CarolinaTexasVirginia End of the Voting Rights Act The Supreme Courts 2013 ruling was decried by critics who said it gutted the law. President Barack Obama was sharply critical of the decision. I am deeply disappointed with the Supreme Court’s decision today. For nearly 50 years, the Voting Rights Act – enacted and repeatedly renewed by wide bipartisan majorities in Congress – has helped secure the right to vote for millions of Americans. Today’s decision invalidating one of its core provisions upsets decades of well-established practices that help make sure voting is fair, especially in places where voting discrimination has been historically prevalent. The ruling was praised, however, in states that had been overseen by the federal government. In South Caroline, Attorney General Alan Wilson described the law as an extraordinary intrusion into state sovereignty in certain states. This is a victory for all voters as all states can now act equally without some having to ask for permission or being required to jump through the extraordinary hoops demanded by federal bureaucracy. Congress was expected to take up revisions of the invalidated section of the law in the summer of 2013.

A literature review of disinfectants commonly used

A literature review of disinfectants commonly used The purpose for this literature review was to examine the literature currently available to the general public on the application of a range of disinfectants used within a microbiology laboratory in both the public e.g. hospital laboratories and the private sector e.g. university laboratories. This literature review was carried out on the effectiveness of disinfectants so that previous and current knowledge on the use of these disinfectants can be analysed. This will help give an insight into the subject area and help with the preparation and production of the final report based on the research being carried during the literature review and research project. The main purpose of the research project being conducted was to compare the effectiveness of a variety of disinfectants especially Trigene which has been endorsed for use in the microbiology laboratories of the Greater Glasgow and Clyde health board and that of Virkon which is currently used by the microbiology laboratory at the University of the West of Scotland. The literature examined showed that the disinfectants used in clinical laboratories and any other area where microorganisms can cause a problem with cross-contamination, should be evaluated for their effectiveness against the range of organisms which might be encountered. It is an important requirement that the disinfectants being used are able to inhibit or kill the microorganisms quickly and by using the lowest concentration available. (Isenberg, 1985) A study conducted by Kasthjerg et al (2010) which looked at the effects of a range of disinfectants on the expression of virulence genes present in the bacterium Listeria monocytogenes. This study showed that effects on the virulence gene in the bacterium could be linked to the chemicals found in the disinfectant with some causing an inhibition of the gene while others showed an induction of the gene Disinfectants A disinfectant is a chemical which is widely used to eradicate a variety of microor ganisms that are currently found in the samples received into a laboratory or are currently used within an educational setting for the teaching of microbiology to students. Disinfectants can have any of the following chemicals as their main active ingredient: halogenated tertiary amines, chlorine containing compounds, phenols, quaternary ammonium compounds and peroxygen’s. (Tyski et al, 2009) Thus the disinfectants can be divided into groups relating to the chemical present as the active ingredient and these groups will be discussed later in the report. It is important that certain criteria are met when classifying a chemical as a disinfectant, these include:- That the chemical components of the disinfectant will not have an adverse effect on the health of the user and if any health issue is realised then appropriate action can be taken to remove this risk i.e. use PPE such as gloves or respiratory mask. (Severs & Lamontagne, 2002) It. is also important that the disinfectant has the ability to render inactive or kill a wide range of microorganisms including viruses, bacteria and fungi. (Severs & Lamontagne, 2002) It is also important that a disinfectant does not have an adverse effect when used on equipment.

If you agree or disagree that the company is paying too much for their Assignment

If you agree or disagree that the company is paying too much for their CEOs. Is it justify or not justify for the large companies - Assignment Example The hard work is carried out by junior employees or other managers such as the human resource manager, the finance manager and others. They then take the finished work to the CEO for approval which is in the form of a mere signature after every detail of the work being explained to them. They also just make appearances in public as the face behind the success of the company while they truly are not. Most of these CEOs are actually just puppet leaders in the company and especially in those companies where there is a board of directors. The board of directors makes the final decision which the CEO then signs and disseminates to the rest of the staff. This is a clear indication of the lack of work they carry out and hence do not deserve such a large salary. It does not matter whether the company is large or not like the 21st Century Fox. If the company is making too much money to the extent of awarding its CEO such a large salary and on top of it all gets awarded other multiple benefits, then they should distribute some of these profits to the best performing employees as a motivation to the rest. It can also be put into corporate social responsibility to assist the rest of the society. If this decision cannot be made by the CEO himself, to refuse to accept such a large salary, then the CEO is selfish. It is understandable that the CEO has worked hard to reach that position and hence deserves the high pay as a reward for the past efforts but the pay should still not be ridiculously high. There are many people that are suffering in the world and can use a little financial assistance from the corporates. The maximum salary should be an average of $2 million in addition to the other fringe benefits and the extra money be used to provide the assistance to those in need in the society. True CEOs who are true and genuine leaders should take a pay cut otherwise they will be classified with the

Career Development Essay Example | Topics and Well Written Essays - 3000 words

Career Development - Essay Example n Manager (SCM) includes managing orders, overseeing production, creating a feasible production schedule, coordinating production and distribution plans and overall planning and forecasting. Duties also include transportation planning and execution paying close attention to tracking. A successful SCM continually focus’ on strategic network optimization, supplier/purchaser relations and cost reductions. SCM’s diagnose potential economic indicators; evaluate reporting documentation quality and solve problems (â€Å"Supply Chain Management†, 2005). Supply chain management encompasses the planning and management of all activities involved in sourcing and procurement, conversion and all logistics management behaviors. It also includes coordination and collaboration with channel partners, which can be suppliers, intermediaries, third-party service providers or customers. In essence, supply chain management integrates supply and demand management within and across companies. Logistics management is the element of supply chain management that plans, implements and controls the efficient forward and reverse flow and storage of goods, services and related information between the point of origin and the point of consumption in order to meet customers’ requirements (College of Business Administration, 2005). Many types of businesses and organizations most likely to employ supply chain managers include communication, consulting, military, manufacturing, retail, computer service, telecommunications and transportation firms, equipm ent manufacturers, print media, public warehouses and wholesale distributors (College of Business Administration, 2005). Companies such as Cisco Systems offer wall-to-wall management of chain supplies including procurement of product components, standard raw materials, customised supplies, and other goods needed to conducted business operation. This process includes selecting the supplier, submitting formal requests for goods and services

Book Review on Imagining India Essay Example for Free

Book Review on Imagining India Essay Monday morning, it is chaos. Despite its pristine new metro and expanding highways, the city can barely contain the morning hubbub, the swarm of people all trying to get somewhere. By the time I reach Kaushik Basus home—set a little apart from the highway, on a quiet street that is empty except for a single, lazy cow who stops in front of the car, in no hurry to move—I am very late, a little grimy, but exhilarated. Kaushik and I chat about how the crowds in the city look completely different compared to, say, two decades ago. Then, you would see people lounging near tea shops, reading the morning paper late into the afternoon, puffing languorously at their beedis and generally shooting the breeze. But as India has changed— bursting forth as one of the worlds fastest-growing countries—so has the scene on the street. And as Kaushik points out, it is this new restlessness, the hum and thrum of its people, that is the sound of Indias economic engine today. Kaushik is the author of a number of books on India and teaches economics at Cornell, and his take on Indias growth—of a country driven by human capital—is now well accepted. Indias position as the worlds go-to destination for talent is hardly surprising; we may have been short on various things at various times, but we have always had plenty of people. The crowded tumult of our cities is something I experience every day as I navigate my way to our Bangalore office through a dense crowd that overflows from the footpaths and on to the road—of software engineers waiting at bus stops, groups of women in colourful saris, on their way to their jobs 38 at the garment factories that line the road, men in construction hats heading towards the semi-completed highway. And then there are the people milling around the cars, hawking magaz ines and pirated versions of the latest best-sellers. * Looking around, I think that if people are the engine of Indias growth, our economy has only just begun to rev up. But to the demographic experts of the nineteenth and twentieth centuries, Indias population made the country quite simply a disaster of epic proportions. Paul Ehlrichs visit to Delhi in 1966 forms the opening of his book The Population Bomb, and his shock as he describes Indias crowds is palpable: People eating, people washing, people sleeping . . . people visiting, arguing and screaming . . . people clinging to buses . . . people, people, people. But in the last two decades, this depressing vision of Indias population as an overwhelming burden has been turned on its head. With growth, our human capital has emerged as a vibrant source of workers and consumers not just for India, but also for the global economy. But this change in our attitudes has not come easily. Since independence, India struggled for decades with policies that tried to put the lid on its surging population. It is only recently that the country has been able to look its billion in the eye and consider its advantages. MILLIONS ON AN ANTHILL For most of the twentieth century, people both within and outside India viewed us through a lens that was distinctly Malthusian. As a poor and extremely crowded part of the world, we seemed to vindicate Thomas Malthuss uniquely despondent vision—that great population growth inevitably led to great famine and despair. The time that Thomas Malthus, writer, amateur economist and clergyman (the enduring term history gave him would be the gloomy parson), lived in may have greatly influenced his theory on population. Nineteenth-century England was seeing very high birth rates, with families having children by the bakers dozen. Malthus— who, as the second of eight children, was himself part of the population explosion he bemoaned—predicted in his An Essay on *Tbe Alchemist, Liars Poker and (Tom Friedman would be delighted) The World Is Flat have been perennial favourites for Indian pirates. the Principle of Population that the unprecedented increases in population would lead to a cycle of famines, of epidemics, and sickly seasons. India in particular seemed to be speedily bearing down the path that Malthus predicted. On our shores, famine was a regular visitor. We endured thirty hunger famines* between 1770 and 1950— plagues during which entire provinces saw a third of their population disappear, and the countryside was covered with the bleached bones of the millions dead.1 By the mid twentieth century, neo-Malthusian prophets were sounding the alarm on the disastrous population growth in India and China, and predicted that the impact of such growth would be felt around the world. Their apocalyptic scenarios helped justify draconian approaches to birth control. Policies recommending sterilization of the unfit and the disabled, and the killing of defective babies gained the air of respectable theory. 2 Indias increasing dependence on food aid from the developed world due to domestic shortages also fuelled the panic around its population growth—in 1960 India had consumed one-eighth of the United States total wheat production, and by 1966 this had grown to onefourth. Consequently, if you were an adult in the 1950s and 1960s and followed the news, it was entirely plausible to believe that the endgame for humanity was just round the corner; you may also have believed that this catastrophe was the making of some overly fecund Indians. Nehru, observing the hand-wringing, remarked that the Western world was getting frightened at the prospect of the masses of Asia becoming vaster and vaster, and swarming all over the place. And it is true that Indians of this generation had a cultural affinity for big families, even among the middle class—every long holiday during my childhood was spent at my grandparents house with my cousins, and a family photo from that time has a hundred people crammed into the frame. Indian families were big enough to be your *Amartya Sen and others have pointed out, however, that while these famines may have seemed to be the consequence of a country that was both poor and overpopulated, they were in fact triggered partly by trade policies and the lack of infrastructure. Lord Lytton exported wheat from India at the height of the 1876-78 famine, and the lack of connectivity across the country affected transportation of grain to affected areas. Main social circle—most people did not mingle extensively outside family weddings, celebrations and visits to each others homes. The growing global worries around our population growth created immense pressure on India to impose some sort of control on our birth rates, and we became the first developing country to initiate a family planning programme. But our early family planning policies had an unusual emphasis on self-control.3 In part this was influenced by leaders such as Gandhi, who preached abstinence; in an interesting departure from his usual policy of non-violence, he had said, Wives should fight off their husbands with force, if necessary. This focus on abstinence and self-restraint continued with independent Indias first health minister, Rajkumari Amrit Kaur, who was in the odd position of being at the helm of a family planning programme while opposing family planning in principle.4 As a result Indian policy during this decade emphasized the rhythm method. Rural India was targeted for raising awareness of the method, and one villager remarked of its success, They talked of the rhythm method to people who didnt know the calendar. Then they gave us rosaries of coloured beads . . . at night, people couldnt tell the red bead for dont from the green for go ahead. 5 Not surprisingly, Indias population continued to grow through the 1950s and 1960s, as fertility remained stubbornly high even while infant mortality and death rates fell rapidly. This was despite the massive awareness-building efforts around family planning that the government undertook. I still remember the small family songs on the radio and the walls of our cities, the sides of buses and trucks were papered with posters that featured happy (and small) cartoon families, and slogans like Us Two, Ours Two. And yet, each census release made it clear that our population numbers continued to relentlessly soar, and we despaired over a graph that was climbing too high, too fast. SNIP, SNIP As the global panic around population growth surged, the Indian and Chinese governments began executing white-knuckle measures of family planning in the 1960s. Our house is on fire, Dr S. Chandrasekhar, minister of health and family planning, said in 1968. If we focused more on sterilization, he added, We can get the blaze under control. By the 1970s, programmes and targets for sterilization of citizens were set up for Indian states. There was even a vasectomy clinic set up at the Victoria Terminus rail station in Bombay, to cater to the passenger traffic flowing through. 7 But no matter how Indian governments tried to promote sterilization with incentives and sops, the number of people willing to undergo the procedure did not go up. Indias poor wanted children—and especially sons—as economic security. State efforts to persuade citizens into sterilization backfired in unexpected ways—as when many people across rural India refused to have the anti-tuberculosis BCG, Bacillus Calmette-Guerin, injections because of a rumour that BCG stood for birth control government.8 In 1975, however, Indira Gandhi announced the Emergency, which suspended democratic rights and elections and endowed her with new powers of persuasion, so to speak. The Indian government morphed into a frighteningly sycophantic group, there to do the bidding of the prime minister and her son Sanjay—the same hotheaded young man who had described the Cabinet ministers as ignorant buffoons, thought his mother a ditherer and regarded the Philippines dictator Ferdinand Marcos his role model.9 In the winter of 1976, I, along with some of my fellow IIT Bombay students, had arrived on the festival circuit in Delhi to participate in the student debates and quizzes (yes, I was an inveterate nerd). It meant going from college to college for competitions, from Hindu to St Stephens to Miranda House to IIT Delhi. Most of us from the sylvan, secluded campus of IIT Bombay were not as politically aware as the Delhi students—the only elections we followed were those for the ITT hostels and student body. But in the Delhi of the Emergency years, sitting around campfires, one heard the whispered tales of Emergency-era atrocities, and of one particular outrage—nasbandi. Sanjay, who had discovered a taste and talent for authoritarianism with the Emergency, had made sterilization—specifically male sterilization or nasbandi— his pet project. The sterilization measures that were introduced came to be known as the Sanjay Effect—a combination, as the demographer Ashish Bose put it to me, of coercion, cruelty, corruption and cooked figures. Ashish notes that incentives to undergo the sterilization procedure included laws that required a sterilization certificate before government permits and rural credit could be granted. Children of parents with more than three children found that schools refused them admission, and prisoners did not get parole until they went under the knife. And some government departments persuaded their more reluctant employees to undergo the procedure by threatening them with charges of embezzlement.* The steep sterilization targets for state governments meant that people were often rounded up like sheep and take n to family planning clinics. For instance, one journalist witnessed municipal police in the small town of Barsi, Maharashtra, dragging several hundred peasants visiting Barsi on market day off the streets. They drove these men in two garbage trucks to the local family planning clinic, where beefy orderlies held them down while they were given vasectomies.10 This scene repeated itself time and again, across the country. It was difficult to trust the sterlization figures the government released since there was so much pressure on the states for results. Nevertheless, the Emergency-era sterilization programme, Ashish notes, may have achieved nearly two-thirds of its target—eight million sterilizations. But democracy soon hit back with a stunning blow. When Indira Gandhi called for elections in 1977—ignoring Sanjays protests, much to his ire11—the Congress was immediately tossed out of power. The nasbandi programme was the last gasp of coercive family planning in India on a large scale, and it became political suicide to implement similar policies. The Janata Party government that followed Indira even changed the label of the programme to avoid the stigma it carried, and family planning became family welfare. While sterilization programmes have occasionally reappeared across states, they have been mostly voluntary, with the focus on incentives to undergo the procedure, f *Asoka Bandarage describes the target fever in Indias sterilization programmes, which gave rise to speed doctors who competed against each other to perform the most number of operations every day, often under ghastly, unhygienic conditions. One celebrated figure was the Indian gynaecologist P.V. Mehta, who entered the Guinness Book of World Records for sterilizing more than 350,000 people in a decade—he claimed that he could perform forty sterilizations in an hour. tThese sweeteners for the procedure have at times been very strange and a little suspect, such as Uttar Pradeshs guns for sterilisation policy in 2004, under which scheme Indians purchasing firearms or seeking gun licences were told they would be fast-tracked if they could round up volunteers for sterilization. A district in Madhya Pradesh also made a similar guns for vasectomies offer to its residents in 2008.

Dead White Males - David Williamson :: essays research papers

"Carpe Diem" In the film Dead Poet’s Society there is an environment created that was rigid and strict. At Welton Academy there were four pillars of ideals that students must attain to and follow. These were excellence, honor, tradition, and discipline. A new teacher was appointed to teach English. John Keating brought with him a style that promoted the individual. This was in direct contrast to the four pillars of ideals. Mr. Keating’s Latin saying of Carpe Diem, which meant seize the day, was something that would cause problems to arise at the academy. A few of his students would deviate from academy’s path. Knox Overstreet was a young man who was attending Welton Academy. He had followed all the rules as everyone else and obeyed. However after a few of Mr. Keating’s classes he changed his outlook of life. Knox had an affinity towards this girl, Chris Noel, but it was against school policy to have women on campus during a semester. With the new saying of Carpe Diem in his mind, Knox ignored the rules and ensued after Chris. In his wooing he attended parties and even met her at her public high school. If the Headmaster found news of this, Knox would have been expelled. Despite all the consequences Know decided to seize the day and forget the whims of society to follow his dreams. Another student of John Keating’s was Charles Dalton. He was more laid back than Knox but he still adhered to the academy’s rules and regulations. Charles was completely taken by the saying, and changed his lifestyle. At the boys illegal Dead Poet’s Society meetings in which they read aloud poetry, he brought tobacco pipes and alcohol as well as girls. As seen by his new name, Nwanda, Charlie broke free of the strict life he had to follow at Welton. He even defied the Headmaster during a meeting by interrupting his speech with a phone call from "God". Although this new behavior ultimately led to his expulsion, the li fe at Welton was probably not suitable for an individual like him. Neil Perry was greatly moved by the Latin words, Carpe Diem. His father set forth such high demands and little choice for Neil. His disciplinarian father mapped out his career and life. Neil always submitted to his father but was always left unhappy and not content with all that his father had planned and all the rules that he had to abide by.

Blender Blade Component Analysis Engineering Essay

The blade constituent in the liquidizer is map to suppression and blending the ingredient with a really fast revolving velocity. First we need to understand the construction of the blade to enable the blade execute the procedure like sliting and softening. We know blade necessitate to be fixed under high rotational velocity operation, therefore the blade must hold the high modulus of rigidness to forestall any deformation during the operation. It is because the shearing force Acts of the Apostless on the blade is really high due to its velocity. Since it is rotate in high velocity when the nutrient are being dump into the nutrient container, it will do a impact acts on the blade that will do the blade to interrupt or check if the blade do non tough plenty. Besides that, the shaft will maintain in contact with the nutrient and ever expose to the nutrient chemical, therefore it must be entire chemical inert. The corroding procedure must non be occurred to forestall wellness risky incident. The high wear opposition is besides of import to the blade, as it will ever run for the interrupted procedure. The cyclic burden will do fatigue therefore we need difficult blade. Normally wear opposition can be increase by making a coating on the blade. Crisp borders with good strength is besides really of import to enable the blade execute the mincing or crunching procedure expeditiously. The blade is various plenty to cut about all the nutrient stuff that can be intermix if needed, strength once more is needed. Here is the drumhead degree Fahrenheit the liquidizer blade belongingss that we use as guideline in blade stuff choice. Hardness High strength Stainless steel High rigidness High wear opposition2.2 MATERIAL SELECTION2.2.1 BLENDER BLADE MATERIAL SELECTIONIn the choice stuff we must see many facets to guarantee the merchandise that we have made successful in overall facet. There some standards that must be see such as: Physical & A ; Mechanical Considerations Thermal Considerations Chemical Considerations Bearing and Wear Considerations Cost Type of utilizations and etc To get down the material choice of the constituent, we have to utilize the assorted comparing charts to compare diverse of stuff that available. In this clip about, we use the specific stiffness to specific strength, strength to cost, strength to toughness, and immature modulus to denseness. These are primary chart that we use to guarantee our choice. In the specific stiffness to specific strength chart, we can acquire the consequence of the stuff that has medium specific strength and high specific stiffness. This is an of import standard of stiffness in our merchandise. In the strength to be chart, we need to compromise the cost and the strength that we can keep competitory monetary value with the strength for safety. In the immature modulus to density chart, we need to hold the mid scope of denseness to forestall corpulence of merchandise with the high immature modulus. High immature modulus means that the emphasis that the, stuff can defy before it ‘s deform. In between strength and stamina, we need to hold both for the blades do non neglect prematurely particularly face the impact gesture of the nutrient encountered by blades.Figure 3: Strength AND TOUGHNESS COMPARISON CHARTFigure 4: Specific STIFFNESS AND SPECIFIC STRENGTH COMPARISON CHARTFigure 5: Young MODULUS AND DENSITY COMPARISONFigure 6: STRENGHT AND COST COMPARISON CHARTFrom the comparing we have made above, the suited stuff that we can take is chiefly metal stuff either alloyed or non. But we need to see corroding procedure that will that topographic point for ferric metal. Then we can take either alloyed metal or ferric alloyed metal like chromium steel steel. In the consequence we get, we besides found the stuff to applicable to our blade constituent production like ceramics. The ground we do non take it as comparing because of its crispness. We can non hold the toffee will do it crack when it is over it ‘s bound so will do the safety job. Based on the characteristic we found in the constituent, We have decide to compare two stuff in doing blade of liquidizer: Alloy steel Stainless steelAlloy Steel Properties[ 5 ] Alloy steel is the steel that contain some alloying elements like Mo, manganese, nickel, Cr, V, Si and B. Compare with C steel, the belongingss of Alloy steels have greater strength, hardness, hot hardness, wear opposition, hardenability, and Toughness. However, to obtain the require belongingss, they are needed to be heat treated.Stainless Steel Properties[ 6 ] Stainless steel differs from C steel by content of Cr in steel. The chief different belongings of the chromium steel steel is its corrosion opposition. Carbon steel rusts when exposed to air and wet. This Fe oxide movie is active and accelerates corrosion by organizing more Fe oxide. Stainless steels have sufficient sum of Cr nowadays so that a inactive movie of Cr oxide to forestall farther corrosionBlade stuff Comparison ChartSTAINLESS STEELParameterALLOY STEEL620 MPa.Ultimate tensile strength570 MPa. 240-290 MPa.Output strength440-500 MPa. 20-24 %Elongation15-18 % aˆ? High ultimate tensile strength. aˆ? Excellent corrosion and oxidization opposition. aˆ? High wear opposition aˆ? High weariness oppositionAdvantagesaˆ? High strength-to-weight ratio. aˆ? High emphasis opposition aˆ? Good corrosion opposition aˆ? High wear opposition aˆ? Expensive. aˆ? Can non be hardened by heat intervention. aˆ? Hard to organize compared to dramatis personae FeDisadvantagesaˆ? Poor in machinebility. Difficult to done by machining. aˆ? More brickle than chromium steel steel aˆ? Hi strength comparison to chromium steel steel but less ultimate tensile strength.Selected Blade Material – chromium steel steelIn doing blade, we have decided to utilize unstained steel because of some ground. The most of import is because we need the stuff that have excellent in corrosion and oxidization opposition. This is because we deal in doing nutrient processor. So that the quality of nutrient is chief thought to guarantee the user is safe to utilize is. Other than that, chromium steel steel has high wear immune. This belongings is good to hold in doing the blade because it ever crisp in cutting the nutrient. The impact stamina is besides the portion that we tend to take 304 steel since we have rotate in high velocity to cut or slit the nutrient. Stainless steel besides has a batch of categorization that we can take for the production of the blade. Therefore we have to take a specific category to guarantee the cost appraisal. After we did the research, we decide to take unstained steel category 304 to be our stuff for the p roduction.Stainless Steel – Grade 304Fe ; & lt ; 0.08 % C ; 17.5-20 % Cr ; 8-11 % Ni ; & lt ; 2 % Mn ; & lt ; 1 % Si ; & lt ; 0.045 % P ; & lt ; 0.03 % S [ 7 ] These are some of its features: – Forming and welding belongingss – Corrosion/ oxidization opposition – Deep drawing quality – Excellent stamina – Low temperature belongingss reacting good to indurating by cold working – Ease of cleansing, easiness of fiction, beauty of visual aspect. Table 1.A Physical belongingss of 304 class chromium steel steel in the annealed statusClassDensity ( kg/m3 )Elastic Modulus ( GPa )Average Coefficient of Thermal Expansion ( mm/m/A °C )Thermal Conductivity ( W/m.K )Specific Heat0-100A °C ( J/kg.K )0-100A °C0-315A °C0-538A °Cat 100A °Cat 500A °C304/L/H 8000 193 17.2 17.8 18.4 16.2 21.5 5002.3 PRODUCT SPECIFICATION AND TECHNICAL DRAWING2.3.1 BLENDER SPECIFICATIOND = 12cm Feature: Portable Rechargeable light weight Jar Capacity: up to 1.5 litres H = 30cm B = 16cm L = 18cm2.3.2 EXPLODED VIEW OF BLENDERFigure 2: Blender Exploded ViewPart Part name 1 Cap 2 Eyelid 3 Jar 4 Jar / blade seal 5 Blade set 6 Jar yoke 7 On-off button 8 Button spring 9 Upper lodging 10 Motor & A ; bushing 11 Motor saddle horse screw 12 Switch, on-off 13 Switch, interlock 14 Prison guard 15 Mini phone doodly-squat 16 Diode 17 Zener rectifying tube 18 Battery cell 19 Base screen 20 Screw, grip 21 Foot 22 Charger2.3.3 BLENDER BLADE SPECIFICATION3.0 STAGES OF THE PROCESS3.1 ALTERNATIVE PROCESS FOR EACH COMPONENT3.1.1 BLENDER BLADE ALTERNATIVE PROCESSThe suited procedure of blade production are projecting, stomping and hammering, we can still bring forth the blade even with different stuff. But every procedure must has it ‘s restrictions and ain advantages. The procedure selected is shown at table below:Figure 7: Blade Manufacturing Alternative ProcessesSince we have chosen the stuff, so we have look at the procedure to bring forth the merchandise. There are diverse of procedure of available outside, we need to take suitably to suite the stuff belongingss and the functionality of the constituent. There are several guidelines that we need to obey. The choice of a suited procedure is based on the undermentioned factors: Types of stuffs and its belongingss Expected quality and belongingss of the constituents Size, form, thickness and complexness in bring forthing the constituents Tolerances and surface coating Incoming procedures involves Design and tooling cost Volume of production Economy Now the chart above has shown 3 primary procedures that we will discourse further to take the best production procedure. Now we discuss the casting procedure. The procedure is a popular fabrication procedure that can hold many advantages. The grounds why we choose the investing casting procedure among assorted procedure of casting are because any stuff can project through this method. The investing casting procedure is economical even for rather low measure usually minimal measure is 1000. Furthermore, the complex form can be produced which meet the blade design. Heat intervention of the casting merchandise is non needed. Excellent surface coating and truth besides can be produced through this method. Again it suites the constituent demand that dimensional and surface coating. But the procedure has the disadvantages. We have the expensive dice tool and stuff cost, long lead clip to hold the concluding merchandise, labour cost is high. After we have seen the procedure we have the clea rer image of the procedure. The following procedure we will discourse the forging procedure. The blocker type of the forging will be used in this procedure. This is because this type has the low dice cost compared to other forging procedure. The production rate is high that will run into the company minimal production demand. Forging will hold the dice to use the compressive force on it in order produce the form we want. In the blocker forging, demand to make the machining to acquire the net form we want. The portion will non be a suited pick if the parts are thick webs and big filets. The chief cost is come from the dice cost which influenced by form and size of the constituent. The measure is besides the major concern in cost footing fabrication. Then we will make the stamping treatment. Stomping besides the sorts of sheet metal organizing utilizing the stamping dice and use the force on the sheet stuff. [ 18 ] The cost effectivity of the metal stomping procedure stems from its ability to bring forth material-intensive parts at production rates much higher than are possible utilizing other traditional methods. With stuff for stomping about bing use in another procedure, the premier country for nest eggs is in cutting production clip. From the above treatments, we can see that stomping will convey us the most economical procedure. Although we need to bear with the high start-up cost, but through the long term, the turnover is still good. The investing casting is excessively arduous and long lead clip which does non suite our selling policy ; the forging is more suited for big constituent.3.2 PROCESS SELECTED AND TOTAL PRODUCT STAGES3.2.1 BLENDER BLADE MANUFACTURING PROCESS3.2.1.1PROCESS SELECTED FOR BLENDER BLADEAfter weighing the pros and cons of procedure, we have chosen the stomping which derived procedures from progressive dice drawing. [ 22 ] By utilizing stomping procedure, there are some advantages compare with other procedure like hammering and die casting. First of wholly, the stomping dies can be well less than the tooling used in other procedures. Other than that, the Quality, truth, map, wear life and visual aspect can all be dramatically improved. By utilizing stomping procedure, the portion of stuff with tougher and harder belongingss can besides be made. Secondary operations like heat intervention and machining are needed to complete a portion. The figure of secondary operation is reduced and it can salvage the cost. To bring forth liquidizer blade by stomping procedure, there are some secondary procedure to be taken in. after the constituent is stamped out from the stamping machine, we need to bore a little hole on the constituent for the assembly intent. After that, flexing procedure will take in to obtain the functional form of liquidizer. Then, the constituent is so to be heat treated to better its mechanical belongingss like strength and stamina. Finally, a finishing procedure will take in to sharpen the blade border by machining procedure and better the wear opposition by add-on procedure like coating of blade with Ti.3.2.1.2 BLENDER BLADE STEPS FLOW CHARTThe phases for blade fabrication system are shown in the stairss flow chart below:Figure 8: Phase OF BLADE MANUFACTURING BY STAMPING3.2.1.3 BLENDER BLADE PROCESS STAGE AND MACHINE USEDStompingThe procedure is start by stomping of a big sheet of metal. We will utilize blanking procedure which is a cutting procedure by utilizing clout and di ce to bring forth the blade profile. For blanking procedure, the merchandise is the portion which is sheared out by clout. To transport out the blanking procedure, the stamping dice and stomping machine is needed. The blade merchandise by blanking procedure is shown at the figure below: Component ( merchandise ) Strip ( work stuff ) Scrap ( discard )Figure 9: blanking of bladeFeatures Of Stamped Parts[ 22 ] after stomping procedure, there are BURR-SIDE or CUT RADIUS feature on the stamped parts. There is a unsmooth border or breaking away burr around the side of the perforated holes. At The opposite side, there is a cut radius or â€Å" rollover † consequence where the blanking or piercing punch enters the metal surface. Both of these defects can be corrected if they affect the map ablility of the constituent. Deburring procedures can be used to take the burrs. Deburring procedure is done by utilizing deburring tool, toppling, or sanding. Drilling will do the holes straight through the full portion thickness. A shaving station in a progressive dice can cut down the demand for secondary handling operations. Besides, utilizing thicker stock than the concluding size called for and dual phonograph record grinding, or individual side grinding, as required will take burrs and rollover. After stomping procedure, the phenomena of CONCENTRICITY can be found on the merchandise itself. The contour of the interior and outside shows different belongingss and even thicknesses. the discrepancy can be cut down by excess allowance to the merchandises made. Besides the concentricity, the flatness/blanking deformations besides common phenomena that occur in the stamped merchandise after stomping procedure. There is the bowing rise in the merchandise due to periphery emphasis. The size of the obeisance varied with the stuff and type of dice used. The solution of the defects can be through the use of compound dice.Machine used for stomping procedure – Stamping MachineIn the stamping machine the major operation is where a metal sheet is being punched utilizing a imperativeness tool in order to give out into coveted form. Different stomping procedure necessitate different type of dice. Example of blanking dice is shown in figure 9Figure 10: Stamping MachineFigure 11: Stamping DieDrillingOnce the constituent is stamped out, the boring procedure will take in to bore a hole on the blade for the assembly intent. A boring machine is needed to bore the hole. The constituent after boring procedure is shown in the figure below: Drilling machine Component ( Merchandise )Figure: Drilling Of BladeMachine Used – Drilling Machine[ 23 ] A boring machine, called a drill imperativeness, is used to cut holes into or through metal, wood, or other stuffs. Boring machines use a boring tool that has cutting borders at its point. This cutting tool is held in the drill imperativeness by a chow or and is rotated and fed into the work at variable velocities. Boring machines may be used to execute other operations like countersinking, drilling, counterboring, topographic point facing, reaming, and tappingFigure 13: boring machineBendingTo obtain the better map ability of the liquidizer blade, the form of the blade should be flexing with certain angle as shown in the figure 9. This is a fictile deforming procedure to alter the form of metal blade. Note has to taken that the flexing portion of the constituent is under high emphasis after the bending procedure. To get the better of it, heat intervention will taking topographic point to hardening and reconstruct the emphasis. The constituent after flexing procedure is shown at below:Figure 14: Bending Of BladeMachine used: Bending Machine[ 24 ] Bending is a common fabrication method to treat sheet metal. It is normally done on a Press brake, but besides swing-bending-machines are used. With this machine a bending stuff is being bent by following the preset angle as a mention. The bending operation creates a consecutive line crook while form operation may make a curving crook.Fi gure 15: CNC Bending MachineHeat intervention[ 25 ] To reconstruct the residuary emphasis that trap in the stamped merchandise, heat intervention is normally carried out. Heat intervention can heat the metal to recrystallization temperature that will realine the grain in the metal. The heat intervention of the metal, the cleft can be reduced and it can be hardened as the finer grain can be obtained. The undermentioned describe the procedure heat intervention of the blade. The blade ballad on the ceramic tray so heat up to the specified temperature to indurate the portion. The oven normally is preheated to faster the procedure. The warming procedure last for 2 hours. After procedure the ceramic tray take out from the oven. The submergence of the merchandise into oil or H2O to execute slaking. This trap the intricate crystal in the metal construction. This procedure besides consequences in the metal going really brittle. After slaking, the blades are reheated to about 260A °C. Then the blades are allowed to chill easy in a procedure called annealing. This toughens the metal while retaining some of the crispness needed for all right sharpening. Further warming and chilling rhythms may be used to indurate other specialised metals.Machine Used: Heat Treating Oven[ 26 ] Heat handling oven is usage to heat the stuff up to 760A °C – 1370A °C It has the map to command the temperature and force per unit area of warming. The box furnace can manage exothermal, endothermal, and enriched ambiances including air, N, and Ar.Figure 16: heat handling ovenMachiningFinally, the blade will undergoes machining procedure as the coating procedure. [ 25 ] After the heat-treated blades are cool, they are polished and sharpened. Polishing is performed by machine in our instance. A level belt smoother is used to bring forth a smooth coating to the sides of the blade. This besides polishes out any Markss from the punch imperativeness operation and removes the surface residue from the heat-treat operation. Next the blade is placed into a grinding fixture that passes it through a series of crunching wheels. Each revolving wheel removes the right sum of metal to organize the border alleviation, point, rough border angle, and other characteristics of the working part of the blade. When the blade is finished with these stairss, it will be rather crisp and may look ready to utilize. However, the concluding sharpening stairs s are required to bring forth a durable border. Honing is the last procedure to take in. the crisp border of blade is produced by a all right grinding operation and called honing. The angle of the hone may be between 17 and 30 grades to the axis of the blade, depending upon the blade application. A smaller angle will bring forth a sharper border, but the border will have on and go dull more rapidly. A all right grinding hone, or â€Å" rock, † is oiled and gently rubbed on the knife border. This action produces the finest sharpened border.Machine Used: Belt Sander[ 27 ] A belt smoother is a machine used to sand down wood and other stuffs for finishing intents. It consists of an electrical motor that turns a brace of membranophones on which a seamless cringle of emery paper is mounted.Figure 17: Belt SanderConsequence on plagiarism checker on hypertext transfer protocol: //www.articlechecker.com/checker.phpMatched PhrasesGoogleA ResultsA Found:MATERIAL SELECTION 2 ( Set Alert ) Carbon steel rusts when exposed to air and wet ( Set Alert ) This Fe oxide movie is active and accelerates corrosion by organizing more Fe oxide ( Set Alert ) Ultimate tensile strength 570 MPa ( Set Alert ) aˆ? Excellent corrosion and oxidization opposition ( Set Alert ) aˆ? Can non be hardened by heat intervention ( Set Alert ) This procedure besides consequences in the metal going really brickle ( Set Alert ) Then the blades are allowed to chill easy in a procedure called annealing ( Set Alert ) This toughens the metal while retaining some of the crispness needed for all right sharpening ( Set Alert ) Further warming and chilling rhythms may be used to indurate other specialized metals ( Set Alert ) This besides polishes out any Markss from the punch imperativeness operation and removes the surface residue from the heat-treat operation ( Set Alert ) Next the blade is placed into a grinding fixture that passes it through a series of crunching wheels ( Set Alert ) Each revolving wheel removes the right sum of metal to or ganize the border alleviation, point, rough border angle, and other characteristics of the working part of the blade ( Set Alert ) When the blade is finished with these stairss, it will be rather crisp and may look ready to utilize ( Set Alert ) However, the concluding sharpening stairss are required to bring forth a durable border ( Set Alert ) The angle of the hone may be between 17 and 30 grades to the axis of the blade, depending upon the blade application ( Set Alert ) A smaller angle will bring forth a sharper border, but the border will have on and go dull more rapidly ( Set Alert ) A all right crunching hone, or † rock, † is oiled and gently rubbed on the knife border ( Set Alert ) This action produces the finest sharpened border ( Set Alert )Entire Matched Phrases / Total Submitted10 % ( 19/182 )

Fast Food Advertising Essay Essay

Advertisements are everywhere. Billboards, Newspapers, Pamphlets and most importantly television. However, there are many people who are concerned about fast food ads, that are running during children programmes. Concerned about children’s wellbeing, people want a ban on fast food advertisements during children programmes. This is because of the addiction, the amount of money being wasted and that children have a lowered pre-frontal lobe capacity. Even though junk food is good to consume every now and then, it should be ban during children TV programmes. There are many addictions, which include alcohol, drugs and smoking. These are dangers that need to be taken seriously. Even though fast food is not the most important, it is still a hazard. The reason many children become addicted towards fast food is how they describe the product. These words include ‘Succulent Fresh Fillets’. This would make children want more. Fast food addiction leads towards obesity which could involve in organ problems such as Type Two Diabetes. This is why fast food advertisements should be banned during children TV programmes. There are many things that parents waste their money on for their children. Lollies, toys, entertainment. However, the major issue is buying junk food. Children persuade their parents to buy a product which leaves them in enjoyment while the parents suffering from a loose of money. Instead of buying junk food, something useful could be bought with the money such as clothing and fresh food which is a much better option. An alternative solution would be to buy Subway which is a healthier option and tastes as good as fast food but junk food ads should not be running during children TV programmes. Children at the age between 0-5 have difficulty understanding that commercials are products that do not actually function as advertised. Furthermore, children at a very young age can understand brand names. Since children also have a lowered pre-frontal lobe capacity which is the part of the brain connected with higher thinking and inhibition of behaviour, it stands to the light of reason that, because children do not have the capacity to make a rational decision making, advertisers target them easily by taking advantage of individuals. This is why junk food advertisements should be ban during children TV programmes. It is important to know that junk food is not a major hazard for teenagers or adults but for children. This is because of the addiction, the amount of money being wasted and that children have a lowered prefrontal lobe capacity and should be banned during children TV programmes.

Goals of business

Goals of business Introduction In the 1970s, Milton Friedman argued that the only purpose of business was to maximise profits. This was based on the assumption that such action would benefit the society through increased employment. Friedman maintained that taking part in other activities would render a company less competitive and consequently less beneficial to the society, employees and the owners.Advertising We will write a custom essay sample on Goals of business specifically for you for only $16.05 $11/page Learn More Since this time, the debate surrounding the degrees to which today’s organisations should be socially responsible has been the source of much research. Therefore, it is important to note that businesses have other aims other than providing profits to their members. For example, they provide innovation which in return brings growth, employment and lifestyle to people’s lives. Many products in the market have been solving several consumer probl ems than before. Additionally, businesses aim at offering social amenities to the society. As presented in this paper, these goals have their merits and demerits. The aim of this paper is to critic and analyse the claim that the main goal of businesses is profit maximisation. To achieve this different business goals are listed in separate paragraphs. Each paragraph discusses and explains particular business goals. According to Ahlstrom, the major goal of businesses is to create new and innovative products, which bring economic growth and improved living standards of the world’s population. Therefore, businesses should aim at providing these benefits to society. This is because failure to do so can lead to long term drop in the society’s welfare. For example, small drop in growth for a long time can reduce the benefits that firms can offer to the society (Henry 1983). One of the ways that firms can use to achieve growth while at the same time offering innovation is by, effective disruptive innovation. An example of this disruptive innovation is technological innovation. Some of the benefits of constant economic growth are increase in per capita income, job creation, improved revenue and living standards. Failure for businesses to grow or slow growth has led the equity markets to punish the companies that made caused the drop.Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More On the other hand, improved growth has made companies to take on better skilled and experienced people. Additionally, the societies’ wellbeing improves and reliance on foreign aid and welfare associations has reduced. Improved living standards have also been realised in countries, such as Europe, North America and parts of Middle East. Therefore, the average annual income of an average individual has raised by around 450% between 1820 and the end of the 20th century. Th is steady growth is an indication of a healthy industry. Another benefit of economic growth is improved life expectancy. For example, a person in 1000 could live for approximately 24 years while today, one can live up to 66 years and even more. From the above analysis, it is clear that businesses should aim at bringing growth and innovative products to the consumers rather than to make profits for the shareholders and owners. This is because, through improved growth, consumer revenues increase leading to improved consumption and living standards (Ahlstrom 2010). According to Bejou, the sole or the major purpose of businesses should be to express compassion which can bring a difference in society. This compassion should be a part of the company’s goals, mission, vision, strategy and decisions that are aimed at reducing the society’s suffering. Some of the values of compassionate companies are integrity, responsibility towards the stakeholders, freedom, Community Social Responsibility (CSR), animal rights protection, among others (Bejou 2011). CSR is the obligation of businesses to offer social, legal and economic support and development to the environment and society. It can also be referred to as ethical contribution towards economic development (Van Beurden Gossling 2008). According to annual reports of research done in 2009, the following are examples of the compassionate companies: Ford Motor Company. This is an award winning company which has created a Food Pantry project that funds food banks across the nation. Additionally, the company’s community service enables its employees to participate in charity works across the globe. For example, in 2009, the company’s employees voluntarily contributed to community service in 44 countries globally (Bejou 2011).Advertising We will write a custom essay sample on Goals of business specifically for you for only $16.05 $11/page Learn More Pepsi Company. The compa ny practices compassion by ensuring good governance towards its investors. Additionally, the company is committed towards providing quality and healthy products to consumers as well as educating consumers about its products and nutrition. It is also at the forefront in protecting human rights and natural resources. The company’s employees enjoy ethical working relationships, empowerment and diversity. Pepsi is also a major contributor to the society. For example, it has contributed funds to help earthquake victims in Chile, Pakistan, China and Haiti. Additionally, it has helped the tsunami victims in Southeast Asia (Bejou 2011). Acropostale Incorporation. The company’s value of integrity enables it to uplift the society’s living standards. For example, during holidays, it offers gifts to hospitalised children, collects and distributes clothes to earthquake victims and the homeless (Bejou 2011). The company also offers support to flood and famine victims. Green M ountain Coffee Roasters Incorporation (GMCR). The company is known for its contribution to environmental conservation, support to the community, its sustainable products and healthy working conditions (Bejou 2011). Target. From 1946, the company has been giving 5% of its income to the community members. Additionally, the company contributes towards environmental conservation. For example, it uses LED (light-emitting diode) displays for lighting. The company is also involved in security enhancement, disaster alleviation and renovation of school programs (Bejou 2011). From the above analysis, it is clear that corporations should be responsible for the environment and the community. Therefore, companies should learn that even though profits are part of the organization’s goals, ethics, vision and compassion are the most important goals; profit maximization should not be their main aim. Corporate Social Responsibility (CSR) has the following characteristics. It is an existing and old idea (it is not new) which portrays the business’s willingness to do good; and its nature and scope are uncertain. Therefore, the CSR that a company conducts depends on upcoming societal needs.Advertising Looking for essay on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Some of the advocates of CSR are the International Business Forum (IBLF), the World Business Council for Sustainable Development (WBCSD), governmental and nons of unethical business practices include failure to pay the suppliers and provision of poor quality consumer goods and services. Critics of capitalism and the Marxists dismiss these responsibilities and argue that the capitalistic businesses are greedy and unethical (Shaw 2008). In order to achieve ethical behaviour, firms can use a free-market model (Wilcke 2004). Conclusion In this essay, I have argued that businesses have more than one goal. For example, they aim at maximizing profits, offering social responsibility to the society, providing growth and development and ethical responsibility. These goals have merits and demerits to the business. Therefore, businesses should strike a balance and decide the goals that they want to achieve. Businesses that are socially irresponsible, unethical, unlawful and disrespectful to the society’s needs face various challenges. Some of them are economic sanctions and law suits. Additionally, these companies face reduced sales as the society shy away from their products. Eventually, these businesses lose public trust and, which affects their profitability. However, these businesses take pride in reduced costs that relate to social responsibility. This is because they engage in little social responsibility activities and projects. On the contrary, ethical, lawful and socially responsible businesses receive improved reputation which leads to improved sales and growth. This is because the society trusts these firms’ products and services. However, socially responsible businesses face challenges such as increased operating and financial costs. These costs can affect the profitability of the socially responsible firms. Businesses should learn that even though achieving both profit maximization and social responsibility is costly, it results in a wide range of benefits to both the business and society. Given the many benefits associated with social responsibility, the main goal of businesses should not be to increase the wealth of the shareholders and owners. References Ahlstrom, D 2010, ‘Innovation and Growth: How Business Contributes to Society’, Academy of Management Perspectives, vol. 24, no. 3, pp. 10-23. Bejou, D 2011, ‘Compassion as the New Philosophy of Business’, Journal of Relationship Marketing, vol. 10, pp. 1-6. Cosans, C 2009, ‘Does Milton Friedman Support a Vigorous Business Ethics?’, Journal of Business Ethics, vol. 87, no. 3, pp. 391-399. Craig Smith, N 2003, ‘Corporate Social Responsibility: Whether or How?’, California Management Review, vol. 45 no. 4, pp. 52-76. Dalai, L 1998, The art of happiness, Riverhead Books, New York. Henry, M 1983, ‘The Case for Corporate Social Responsibility’, The Journal of Business Strategy, vol. 4 no. 2, pp. 3-15. Husted, B W Salazar, J 2006, ‘Taking Friedman Seriously: Maximising Profits and Social Performance’, Journal of Management Studies, vol. 43 no. 1, pp. 75-91. Pfeffer, J 1998, The human equation: Building profits by putting people first, Harvard Business School Press, Boston. Shaw, W 2009, ‘Marxism, Business Ethics and Corporate Social Responsibility’, Journal of Business Ethics, vol. 84, no. 4, pp. 565-576. Van Beurden, P Gossling, T 2008, ‘The Worth of Values – A Literature Review on the Relation Between Corporate Social and Financial Performance’, Journal of Business Ethics, vol. 82, no. 2, pp. 407-424. Viscusi, WK 1995, Fatal tradeoffs: Public and private responsibilities for risk, Oxford University Press, New York. Wilcke, RW 2004, ‘An Appropriate Ethical Model for Business and a Critique of Milton Friedman’s Thesis’, The Independent Review, vol. 9 no. 2, pp. 187-209. Customer Inserts His/Her Name Customer Inserts ID

Clinical Health Psychology Assignment Essay Example | Topics and Well Written Essays - 1500 words

Clinical Health Psychology Assignment - Essay Example Limitations of the current research are discussed. The cognitive and emotional experience of cancer is associated with a broad range of reactions, from fear and anger to reconciliation and hope. Throughout the development of psychology science, cancer had always been one of the most problematic and challenging aspects of psychological strategies. Based on what the current research tells us, it is at least ridiculous to believe that psychologists can prevent cancer: they can either effectively alleviate the emotional and cognitive difficulties that necessarily emerge the moment the individual is being diagnosed with cancer, or contribute to the development of rational self-assessment and medical evaluation behaviors, which will help individuals, especially those with the genetic predisposition to cancer, to reduce the risks of being diagnosed with cancer when it is too late. The question of whether psychologists can prevent cancer is actually a question of whether psychology and individuals’ mental health are the basic predictors of cancer in various groups of patients. Postmodern medical science displays the tendency toward recognizing mental health conditions and complications as important contributors to other complex health states like asthma, diabetes, and even peptic ulcers (Nevid, 2008). Stress is cited among the most widely spread chronic health conditions that add their share of complexity to coronary heart disease and regular headaches (Nevid, 2008). For this reason, psychologists could provide individuals with effective support and reduce the risks of asthma and cardiovascular diseases associated with stress. Unfortunately, there is no clear answer to the question of whether cancer is the result of psychological influences. The extensive body of research proves psychology counseling to be an effective instrument of alleviating

Women in Chinese society Essay Example | Topics and Well Written Essays - 1250 words - 1

Women in Chinese society - Essay Example The influence of Chinese women of the Later Empire depended on their knowledge of collective ethos and their ability to appeal to the power of the communities. The changes made by women often could have affected their individual lives or those of their close relatives only indirectly, through the mediation of the institutes of the society. The most significant example is widows who ended their lives for the societal ideals, so that the relatives of such women could have been rewarded3. Even without equality with men, Chinese women occupied a significant place in the ethical system of the country. They could have had influence when they accepted the existing laws. However, sometimes they dared to oppose laws or use them cunningly against more powerful members of the society. Thus, the firstsection of this paper deals with the consequences of acceptance of women’s place in the Chinese social system; the second section is dedicated to the means to empowerment in rare cases of women’s resistance to dominant ethical norms. The title comes from the story of Widow Wu from the section â€Å"Women and the Problems They Create†4 about a woman rewarded for her chastity, hard work, and humble behavior. It is remarkable that this was the supreme spiritual authority that rewarded widow Wu, not the society. The widow was just supported, not given extra money for pleasure; her private life also did not change at all. Still, she had more significant achievement: namely, she reached the ethical ideal which was relevant for the representatives of all genders and social classes. In Chinese society, neither women nor men were treated as independent subjects valuable for their individuality, like it would be in Western countries. It follows from â€Å"Family instructions† that young girls and boys were equally part of territorial and generational unity; they had to be loyal to family and performed irreplaceable